[ 296.577844] Restarting system.
þ
__ __ _ _
| / | __ _ _ ____ _____| | |
| |/| |/ _` | '__ / / _ | |
| | | | (_| | | V / __/ | |
|_| |_|__,_|_| _/ ___|_|_|
_ _ ____ _
| | | | | __ ) ___ ___ | |_
| | | |___| _ / _ / _ | __|
| |_| |___| |_) | (_) | (_) | |_
___/ |____/ ___/ ___/ __|
** MARVELL BOARD: SHEEVA PLUG LE
U-Boot 1.1.4 (Jul 19 2009 - 16:03:28) Marvell version: 3.4.19
U-Boot code: 00600000 -> 0067FFF0 BSS: -> 006CFB00
Soc: 88F6281 A0 (DDR2)
CPU running @ 1200Mhz L2 running @ 400Mhz
SysClock = 400Mhz , TClock = 200Mhz
DRAM CAS Latency = 5 tRP = 5 tRAS = 18 tRCD=6
DRAM CS[0] base 0x00000000 size 256MB
DRAM CS[1] base 0x10000000 size 256MB
DRAM Total size 512MB 16bit width
Addresses 8M - 0M are saved for the U-Boot usage.
Mem malloc Initialization (8M - 7M): Done
NAND:512 MB
Flash: 0 kB
CPU : Marvell Feroceon (Rev 1)
Streaming disabled
Write allocate disabled
USB 0: host mode
PEX 0: interface detected no Link.
Net: egiga0 [PRIME], egiga1
Hit any key to stop autoboot: 3 2 1 0
SDHC found. Card desciption is:
Manufacturer: 0x1b, OEM "SM"
Product name: "00000", revision 1.0
Serial number: 2982416674
Manufacturing date: 12/2008
CRC: 0x00, b0 = 0
5095986 bytes read
1426888 bytes read
## Booting image at 00400000 ...
Image Name: Debian kernel 2.6.32-trunk-kirkw
Created: 2010-03-20 23:12:28 UTC
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 1426824 Bytes = 1.4 MB
Load Address: 00008000
Entry Point: 00008000
Verifying Checksum ... OK
OK
## Loading Ramdisk Image at 00800000 ...
Image Name: Debian ramdisk 2.6.32-trunk-kirk
Created: 2010-03-20 23:12:29 UTC
Image Type: ARM Linux RAMDisk Image (gzip compressed)
Data Size: 5095922 Bytes = 4.9 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Starting kernel ...
Uncompressing Linux... done, booting the kernel.
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-trunk-kirkwood (Debian 2.6.32-5) (ben@decadent.org.uk) (gcc version 4.3.4 (Debian 4.3.4-6) ) #1 Mon Jan 11 10:57:12 UTC 2010
[ 0.000000] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=00053977
[ 0.000000] CPU: VIVT data cache, VIVT instruction cache
[ 0.000000] Machine: Marvell SheevaPlug Reference Board
[ 0.000000] Memory policy: ECC disabled, Data cache writeback
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130048
[ 0.000000] Kernel command line: console=ttyS0,115200
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 256MB 256MB = 512MB total
[ 0.000000] Memory: 510208KB available (3504K code, 578K data, 120K init, 0K highmem)
[ 0.000000] SLUB: Genslabs=11, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:114
[ 0.000000] Console: colour dummy device 80x30
[ 21.474960] Calibrating delay loop... 1192.75 BogoMIPS (lpj=5963776)
[ 21.714922] Security Framework initialized
[ 21.714942] SELinux: Disabled at boot.
[ 21.714967] Mount-cache hash table entries: 512
[ 21.715262] Initializing cgroup subsys ns
[ 21.715277] Initializing cgroup subsys cpuacct
[ 21.715287] Initializing cgroup subsys devices
[ 21.715296] Initializing cgroup subsys freezer
[ 21.715303] Initializing cgroup subsys net_cls
[ 21.715346] CPU: Testing write buffer coherency: ok
[ 21.716036] devtmpfs: initialized
[ 21.717676] regulator: core version 0.5
[ 21.717882] NET: Registered protocol family 16
[ 21.718376] Kirkwood: MV88F6281-A0, TCLK=200000000.
[ 21.718388] Feroceon L2: Enabling L2
[ 21.718421] Feroceon L2: Cache support initialised.
[ 21.720432] bio: create slab <bio-0> at 0
[ 21.720694] vgaarb: loaded
[ 21.721141] Switching to clocksource orion_clocksource
[ 21.724778] NET: Registered protocol family 2
[ 21.725070] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 21.725817] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 21.726169] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
[ 21.726348] TCP: Hash tables configured (established 16384 bind 16384)
[ 21.726358] TCP reno registered
[ 21.726507] NET: Registered protocol family 1
[ 21.726675] Unpacking initramfs...
[ 22.052100] Freeing initrd memory: 4976K
[ 22.052191] NetWinder Floating Point Emulator V0.97 (double precision)
[ 22.052434] audit: initializing netlink socket (disabled)
[ 22.052484] type=2000 audit(0.570:1): initialized
[ 22.058909] VFS: Disk quotas dquot_6.5.2
[ 22.059172] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 22.059264] JFFS2 version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
[ 22.059894] msgmni has been set to 1006
[ 22.061527] alg: No test for stdrng (krng)
[ 22.061645] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 22.061658] io scheduler noop registered
[ 22.061665] io scheduler anticipatory registered
[ 22.061672] io scheduler deadline registered
[ 22.061858] io scheduler cfq registered (default)
[ 22.067756] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[ 22.068200] serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 33) is a 16550A
[ 22.387771] console [ttyS0] enabled
[ 22.391832] NAND device: Manufacturer ID: 0xad, Chip ID: 0xdc (Hynix NAND 512MiB 3,3V 8-bit)
[ 22.400316] Scanning device for bad blocks
[ 22.435580] Bad eraseblock 1064 at 0x000008500000
[ 22.487249] Bad eraseblock 2671 at 0x000014de0000
[ 22.492016] Bad eraseblock 2672 at 0x000014e00000
[ 22.534774] Bad eraseblock 3974 at 0x00001f0c0000
[ 22.543046] Creating 3 MTD partitions on "orion_nand":
[ 22.548217] 0x000000000000-0x000000100000 : "u-boot"
[ 22.553765] 0x000000100000-0x000000500000 : "uImage"
[ 22.559209] 0x000000500000-0x000020000000 : "root"
[ 22.565447] mice: PS/2 mouse device common for all mice
[ 22.571039] rtc-mv rtc-mv: rtc core: registered rtc-mv as rtc0
[ 22.576999] i2c /dev entries driver
[ 22.580667] cpuidle: using governor ladder
[ 22.584915] cpuidle: using governor menu
[ 22.588946] Registered led device: plug:green:health
[ 22.593995] mv_xor_shared mv_xor_shared.0: Marvell shared XOR driver
[ 22.600390] mv_xor_shared mv_xor_shared.1: Marvell shared XOR driver
[ 22.641203] mv_xor mv_xor.0: Marvell XOR: ( xor cpy )
[ 22.681201] mv_xor mv_xor.1: Marvell XOR: ( xor fill cpy )
[ 22.721201] mv_xor mv_xor.2: Marvell XOR: ( xor cpy )
[ 22.761200] mv_xor mv_xor.3: Marvell XOR: ( xor fill cpy )
[ 22.767859] TCP cubic registered
[ 22.771105] NET: Registered protocol family 17
[ 22.775918] registered taskstats version 1
[ 22.780651] rtc-mv rtc-mv: setting system clock to 2010-03-27 20:04:14 UTC (1269720254)
[ 22.788751] Freeing init memory: 120K
Loading, please wait...
Begin: Loading essential drivers ... done.
Begin: Running /scripts/init-premount ... [ 23.322055] MV-643xx 10/100/1000 ethernet driver version 1.4
[ 23.328000] mv643xx_eth smi: probed
[ 23.372254] net eth0: port 0 with MAC address 00:50:43:01:68:8a
[ 23.388502] usbcore: registered new interface driver usbfs
[ 23.395214] mmc0: mvsdio driver initialized, lacking card detect (fall back to polling)
[ 23.403411] usbcore: registered new interface driver hub
[ 23.410349] usbcore: registered new device driver usb
[ 23.429105] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 23.435740] orion-ehci orion-ehci.0: Marvell Orion EHCI
[ 23.441057] orion-ehci orion-ehci.0: new USB bus registered, assigned bus number 1
[ 23.471187] orion-ehci orion-ehci.0: irq 19, io mem 0xf1050000
[ 23.483781] mmc0: host does not support reading read-only switch. assuming write-enable.
[ 23.491949] orion-ehci orion-ehci.0: USB 2.0 started, EHCI 1.00
[ 23.497949] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 23.504791] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 23.512054] usb usb1: Product: Marvell Orion EHCI
[ 23.516779] usb usb1: Manufacturer: Linux 2.6.32-trunk-kirkwood ehci_hcd
[ 23.523519] usb usb1: SerialNumber: orion-ehci.0
[ 23.528165] mmc0: new high speed SDHC card at address 0002
[ 23.547108] mmcblk0: mmc0:0002 00000 3.81 GiB
[ 23.551772] mmcblk0: p1 p2 p3
[ 23.555638] usb usb1: configuration #1 chosen from 1 choice
[ 23.564011] hub 1-0:1.0: USB hub found
[ 23.567813] hub 1-0:1.0: 1 port detected
done.
Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
Begin: Running /scripts/local-premount ... done.
[ 23.785569] kjournald starting. Commit interval 5 seconds
[ 23.791103] EXT3-fs: mounted filesystem with ordered data mode.
Begin: Running /scripts/local-bottom ... done.
done.
Begin: Running /scripts/init-bottom ... done.
[ 23.891501] usb 1-1: new high speed USB device using orion-ehci and address 2
INIT: [ 24.042701] usb 1-1: New USB device found, idVendor=0471, idProduct=085b
[ 24.049434] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 24.056621] usb 1-1: Product: USB Memory Key
[ 24.060907] usb 1-1: SerialNumber: dad30b02ebf5ce
version 2.86 boo[ 24.066049] usb 1-1: configuration #1 chosen from 1 choice
ting
Starting the hotplug events dispatcher: udevd[ 24.403178] udev: starting version 151
.
Synthesizing the initial hotplug events...done.
Waiting for /dev to be fully populated...[ 24.884159] SCSI subsystem initialized
[ 24.949031] Initializing USB Mass Storage driver...
[ 24.954223] scsi0 : SCSI emulation for USB Mass Storage devices
[ 24.960858] usbcore: registered new interface driver usb-storage
[ 24.967405] USB Mass Storage support registered.
done.
Activating swap...[ 25.152562] Adding 487864k swap on /dev/mmcblk0p2. Priority:-1 extents:1 across:487864k SS
done.
Checking root file system...fsck from util-linux-ng 2.16.2
e2fsck 1.41.10 (10-Feb-2009)
root: clean, 21609/204000 files, 187422/815472 blocks
done.
[ 26.110461] EXT3 FS on mmcblk0p3, internal journal
Cleaning up ifupdown....
Checking file systems...fsck from util-linux-ng 2.16.2
e2fsck 1.41.10 (10-Feb-2009)
/dev/mmcblk0p1: clean, 28/122880 files, 48189/245761 blocks
done.
Setting up networking....
Mounting local filesystems...