-bash-3.2# cd \/tmp\/
\n-bash-3.2# wget http:\/\/jeff.doozan.com\/debian\/uboot\/install_uboot_mtd0.sh
\nConnecting to jeff.doozan.com (69.163.187.226:80)
\nwget: cannot connect to remote host (69.163.187.226): Network is unreachable
\n-bash-3.2# route add default gw 192.168.4.250
\n-bash: route: command not found
\n-bash-3.2# \/sbin\/route add default gw 192.168.4.250
\n-bash-3.2# wget http:\/\/jeff.doozan.com\/debian\/uboot\/install_uboot_mtd0.sh
\nConnecting to jeff.doozan.com (69.163.187.226:80)
\ninstall_uboot_mtd0.s 100% |******************************************************************************************************************************************| 15859 00:00:00 ETA
\n-bash-3.2# ls
\ninstall_uboot_mtd0.sh resolv.conf var
\n-bash-3.2# chmod +x install_uboot_mtd0.sh
\n-bash-3.2# .\/install_uboot_mtd0.sh<\/p>\n
!!!!!! DANGER DANGER DANGER DANGER DANGER DANGER !!!!!!<\/p>\n
If you lose power to your device while running this script,
\nit could be left in an unusable state.<\/p>\n
This script will replace the bootloader on \/dev\/mtd0.<\/p>\n
This installer will only work on a Seagate Dockstar or Pogoplug Pink.
\nDo not run this installer on any other device.<\/p>\n
By typing ok, you agree to assume all liabilities and risks
\nassociated with running this installer.<\/p>\n
If you agree, type ‘ok’ and press ENTER to continue: ok<\/p>\n
DISABLE POGOPLUG SERVICES<\/p>\n
The pogoplug service includes an auto-update feature which could
\nbe used to cripple or disable your device. It is recommended
\nthat you disable this service.<\/p>\n
NOTE: The pogoplug service is proprietary software
\ncreated by Cloud Engines. It is not available for use
\nin other distributions and will not be available in
\nyour new linux installation even if you choose not to disable it.<\/p>\n
Would you like to disable the pogoplug services? [Y\/n] Y
\nApplying fixes to the pogoplug environment…
\nDisabling the pogoplug service…
\nDone fixing pogoplug environment.<\/p>\n
# checking for \/uboot-original-mtd0.kwb…<\/p>\n
# Installing \/uboot-original-mtd0.kwb…
\nConnecting to jeff.doozan.com (69.163.187.226:80)
\nuboot-original-mtd0. 100% |******************************************************************************************************************************************| 49 –:–:– ETA
\nConnecting to jeff.doozan.com (69.163.187.226:80)
\nuboot-original-mtd0. 100% |******************************************************************************************************************************************| 512k 00:00:00 ETA
\n# Successfully installed \/uboot-original-mtd0.kwb.
\n# checking for \/usr\/sbin\/blparam…<\/p>\n
# Installing \/usr\/sbin\/blparam…
\nConnecting to jeff.doozan.com (69.163.187.226:80)
\nblparam.md5 100% |******************************************************************************************************************************************| 42 –:–:– ETA
\nConnecting to jeff.doozan.com (69.163.187.226:80)
\nblparam 100% |******************************************************************************************************************************************| 14168 00:00:00 ETA
\n# Successfully installed \/usr\/sbin\/blparam.
\n# checking for \/usr\/sbin\/nandwrite…<\/p>\n
# Installing \/usr\/sbin\/nandwrite…
\nConnecting to jeff.doozan.com (69.163.187.226:80)
\nnandwrite.md5 100% |******************************************************************************************************************************************| 44 –:–:– ETA
\nConnecting to jeff.doozan.com (69.163.187.226:80)
\nnandwrite 100% |******************************************************************************************************************************************| 11500 –:–:– ETA
\n# Successfully installed \/usr\/sbin\/nandwrite.
\n# checking for \/usr\/sbin\/nanddump…<\/p>\n
# Installing \/usr\/sbin\/nanddump…
\nConnecting to jeff.doozan.com (69.163.187.226:80)
\nnanddump.md5 100% |******************************************************************************************************************************************| 43 –:–:– ETA
\nConnecting to jeff.doozan.com (69.163.187.226:80)
\nnanddump 100% |******************************************************************************************************************************************| 21286 –:–:– ETA
\n# Successfully installed \/usr\/sbin\/nanddump.
\n# checking for \/usr\/sbin\/flash_erase…<\/p>\n
# Installing \/usr\/sbin\/flash_erase…
\nConnecting to jeff.doozan.com (69.163.187.226:80)
\nflash_erase.md5 100% |******************************************************************************************************************************************| 46 –:–:– ETA
\nConnecting to jeff.doozan.com (69.163.187.226:80)
\nflash_erase 100% |******************************************************************************************************************************************| 12819 –:–:– ETA
\n# Successfully installed \/usr\/sbin\/flash_erase.
\n# checking for \/usr\/sbin\/fw_printenv…<\/p>\n
# Installing \/usr\/sbin\/fw_printenv…
\nConnecting to jeff.doozan.com (69.163.187.226:80)
\nfw_printenv.md5 100% |******************************************************************************************************************************************| 46 –:–:– ETA
\nConnecting to jeff.doozan.com (69.163.187.226:80)
\nfw_printenv 100% |******************************************************************************************************************************************| 652k 00:00:00 ETA
\n# Successfully installed \/usr\/sbin\/fw_printenv.
\n# checking for \/etc\/fw_env.config…<\/p>\n
# Installing \/etc\/fw_env.config…
\nConnecting to jeff.doozan.com (69.163.187.226:80)
\nfw_env.config.md5 100% |******************************************************************************************************************************************| 48 –:–:– ETA
\nConnecting to jeff.doozan.com (69.163.187.226:80)
\nfw_env.config 100% |******************************************************************************************************************************************| 329 –:–:– ETA
\n# Successfully installed \/etc\/fw_env.config.<\/p>\n
# Attempting to auto-detect your device…Dockstar detected<\/p>\n
# Installing uBoot
\nConnecting to jeff.doozan.com (69.163.187.226:80)
\nuboot.mtd0.kwb.md5 100% |******************************************************************************************************************************************| 49 –:–:– ETA
\nConnecting to jeff.doozan.com (69.163.187.226:80)
\nuboot.mtd0.kwb 100% |******************************************************************************************************************************************| 512k 00:00:00 ETA
\nErase Total 4 Units
\nPerforming Flash Erase of length 131072 at offset 0x60000 done
\nWriting data to block 0 at offset 0x0
\nWriting data to block 1 at offset 0x20000
\nWriting data to block 2 at offset 0x40000
\nWriting data to block 3 at offset 0x60000
\nBlock size 131072, page size 2048, OOB size 64
\nDumping data starting at 0x00000000 and ending at 0x00080000…
\n## Verifying new uBoot…
\nConnecting to jeff.doozan.com (69.163.187.226:80)
\nuboot.mtd0.kwb.md5 100% |******************************************************************************************************************************************| 49 –:–:– ETA
\n# Verified successfully!<\/p>\n
# Installing uBoot environment
\nWarning: Bad CRC, using default environment
\n## Error: “ethaddr” not defined
\nWarning: Bad CRC, using default environment
\n## Error: “rescue_installed” not defined
\nWarning: Bad CRC, using default environment
\n## Error: “bootcmd_rescue” not defined
\nWarning: Bad CRC, using default environment
\n## Error: “rescue_custom_params” not defined
\nWarning: Bad CRC, using default environment
\n## Error: “usb_custom_params” not defined
\nWarning: Bad CRC, using default environment
\n## Error: “ubifs_custom_params” not defined
\nConnecting to jeff.doozan.com (69.163.187.226:80)
\nuboot.environment.md 100% |******************************************************************************************************************************************| 52 –:–:– ETA
\nConnecting to jeff.doozan.com (69.163.187.226:80)
\nuboot.environment 100% |******************************************************************************************************************************************| 128k 00:00:00 ETA
\nErase Total 1 Units
\nPerforming Flash Erase of length 131072 at offset 0xc0000 done
\nWriting data to block 6 at offset 0xc0000<\/p>\n
# Verifying uBoot environment
\nECC failed: 6
\nECC corrected: 0
\nNumber of bad blocks: 0
\nNumber of bbt blocks: 0
\nBlock size 131072, page size 2048, OOB size 64
\nDumping data starting at 0x000c0000 and ending at 0x000e0000…
\nConnecting to jeff.doozan.com (69.163.187.226:80)
\nuboot.environment.md 100% |******************************************************************************************************************************************| 52 –:–:– ETA<\/p>\n
# uBoot installation has completed successfully.
\n-bash-3.2# \/usr\/bin\/f
\nfdformat find flash_eraseall fold free ftpget ftpput fuser
\n-bash-3.2# \/usr\/sbin\/fw_
\nfw_printenv fw_setenv
\n-bash-3.2# \/usr\/sbin\/fw_printenv
\nethact=egiga0
\nbootdelay=3
\nbaudrate=115200
\narcNumber=2097
\nmainlineLinux=yes
\nconsole=ttyS0,115200
\nled_init=green blinking
\nled_exit=green off
\nled_error=orange blinking
\nmtdparts=mtdparts=orion_nand:1M(u-boot),4M(uImage),32M(rootfs),-(data)
\nmtdids=nand0=orion_nand
\npartition=nand0,2
\nstdin=serial
\nstdout=serial
\nstderr=serial
\nrescue_installed=0
\nrescue_set_bootargs=setenv bootargs console=$console ubi.mtd=2 root=ubi0:rootfs ro rootfstype=ubifs $mtdparts $rescue_custom_params
\nrescue_bootcmd=if test $rescue_installed -eq 1; then run rescue_set_bootargs; nand read.e 0x800000 0x100000 0x400000; bootm 0x800000; else run pogo_bootcmd; fi
\npogo_bootcmd=if fsload uboot-original-mtd0.kwb; then go 0x800200; fi
\nforce_rescue=0
\nforce_rescue_bootcmd=if test $force_rescue -eq 1 || ext2load usb 0:1 0x1700000 \/rescueme 1 || fatload usb 0:1 0x1700000 \/rescueme.txt 1; then run rescue_bootcmd; fi
\nubifs_mtd=3
\nubifs_set_bootargs=setenv bootargs console=$console ubi.mtd=$ubifs_mtd root=ubi0:rootfs rootfstype=ubifs $mtdparts $ubifs_custom_params
\nubifs_bootcmd=run ubifs_set_bootargs; if ubi part data && ubifsmount rootfs && ubifsload 0x800000 \/boot\/uImage && ubifsload 0x1100000 \/boot\/uInitrd; then bootm 0x800000 0x1100000; fi
\nusb_scan=usb_scan_done=0;for scan in $usb_scan_list; do run usb_scan_$scan; if test $usb_scan_done -eq 0 && ext2load usb $usb 0x800000 \/boot\/uImage 1; then usb_scan_done=1; echo “Found bootable drive on usb $usb”; setenv usb_device $usb; setenv usb_root \/dev\/$dev; fi; done
\nusb_scan_list=1 2 3 4
\nusb_scan_1=usb=0:1 dev=sda1
\nusb_scan_2=usb=1:1 dev=sdb1
\nusb_scan_3=usb=2:1 dev=sdc1
\nusb_scan_4=usb=3:1 dev=sdd1
\nusb_init=run usb_scan
\nusb_device=0:1
\nusb_root=\/dev\/sda1
\nusb_rootfstype=ext2
\nusb_rootdelay=10
\nusb_set_bootargs=setenv bootargs console=$console root=$usb_root rootdelay=$usb_rootdelay rootfstype=$usb_rootfstype $mtdparts $usb_custom_params
\nusb_bootcmd=run usb_init; run usb_set_bootargs; run usb_boot
\nusb_boot=mw 0x800000 0 1; ext2load usb $usb_device 0x800000 \/boot\/uImage; if ext2load usb $usb_device 0x1100000 \/boot\/uInitrd; then bootm 0x800000 0x1100000; else bootm 0x800000; fi
\nbootcmd=usb start; run force_rescue_bootcmd; run ubifs_bootcmd; run usb_bootcmd; usb stop; run rescue_bootcmd; run pogo_bootcmd; reset
\nethaddr=00:10:75:1A:D3:B0<\/p>\n","protected":false},"excerpt":{"rendered":"
-bash-3.2# cd \/tmp\/ -bash-3.2# wget http:\/\/jeff.doozan.com\/debian\/uboot\/install_uboot_mtd0.sh Connecting to jeff.doozan.com (69.163.187.226:80) wget: cannot connect to remote host (69.163.187.226): Network is unreachable -bash-3.2# route add default gw 192.168.4.250 -bash: route: command not found -bash-3.2# \/sbin\/route add default gw 192.168.4.250 -bash-3.2# wget http:\/\/jeff.doozan.com\/debian\/uboot\/install_uboot_mtd0.sh Connecting to jeff.doozan.com (69.163.187.226:80) install_uboot_mtd0.s 100% |******************************************************************************************************************************************| 15859 00:00:00 ETA -bash-3.2# ls install_uboot_mtd0.sh resolv.conf var … Continue reading uboot install on dockstar<\/span><\/a><\/p>\n","protected":false},"author":1,"featured_media":0,"comment_status":"closed","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[26],"tags":[51,54,73,117,127],"class_list":["post-66","post","type-post","status-publish","format-standard","hentry","category-dockstar","tag-debian","tag-dockstar","tag-install","tag-sheeva","tag-uboot"],"_links":{"self":[{"href":"https:\/\/olkn.myvnc.com\/index.php?rest_route=\/wp\/v2\/posts\/66","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/olkn.myvnc.com\/index.php?rest_route=\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/olkn.myvnc.com\/index.php?rest_route=\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/olkn.myvnc.com\/index.php?rest_route=\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/olkn.myvnc.com\/index.php?rest_route=%2Fwp%2Fv2%2Fcomments&post=66"}],"version-history":[{"count":0,"href":"https:\/\/olkn.myvnc.com\/index.php?rest_route=\/wp\/v2\/posts\/66\/revisions"}],"wp:attachment":[{"href":"https:\/\/olkn.myvnc.com\/index.php?rest_route=%2Fwp%2Fv2%2Fmedia&parent=66"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/olkn.myvnc.com\/index.php?rest_route=%2Fwp%2Fv2%2Fcategories&post=66"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/olkn.myvnc.com\/index.php?rest_route=%2Fwp%2Fv2%2Ftags&post=66"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}